Supported Rim
The top rim supports the sink and covers the countertop cut edge.
9 current modelsHOMES Drop-In Sinks
Drop-In Stainless Steel Kitchen Sink Series
Drop-in sinks are fitted from above the countertop, with the rim carrying the sink load and covering the cut edge. This series is intended for distributors, replacement programs and projects that need straightforward installation across common countertop materials.
Current Range9 models
Buyer TypeOEM / Wholesale
Lead TimeConfirm by order
InstallationTopmount / Self-Rimming
MaterialSUS304 / specified steel
FinishBrushed / selected PVD
Order BasisApproved model and packing sheet
Series planning
A Practical Top-Mount Range for Repeat Orders
The exposed rim makes a drop-in sink easier to position and seal during installation. Buyers can compare compact and large bowls, single- and double-bowl layouts, deck configurations and drain positions before confirming the approved drawing for each order.
Product construction
What Buyers Should Compare in This Series
Use these construction points together with the model table. Final dimensions, components and installation details follow the approved drawing and quotation.
Flexible Replacement
Common overall sizes help match renovation and replacement programs.
Deck Options
Faucet holes, soap dispensers and accessory positions are confirmed by model.
OEM Supply
Steel grade, finish, logo, carton and accessory sets can be specified for bulk orders.
Model range
Drop-In Sinks Model Comparison
Select a model to review its current images and specifications. Request the approved drawing before cabinet or countertop fabrication.
| Model | Overall Dimension | Bowl / Cabinet Note | Thickness |
|---|---|---|---|
| T5048 | 500 x 480 mm | See approved drawing | 0.6-0.8mm / 1.0-1.2mm (18-20gauge) / 1.5mm(16gauge) / 4.Customers’ requirements |
| T6048 | 600 x 480 mm | See approved drawing | 0.6-0.8mm / 1.0-1.2mm (18-20gauge) / 1.5mm(16gauge) / 4.Customers’ requirements |
| T6848 | 680 x 480 mm | See approved drawing | 0.6-0.8mm / 1.0-1.2mm (18-20gauge) / 1.5mm(16gauge) / 4.Customers’ requirements |
| T7548 | 750 x 480 mm | See approved drawing | 0.6-0.8mm / 1.0-1.2mm (18-20gauge) / 1.5mm(16gauge) / 4.Customers’ requirements |
| T8048 | 800 x 480 mm | See approved drawing | 0.6-0.8mm / 1.0-1.2mm (18-20gauge) / 1.5mm(16gauge) / 4.Customers’ requirements |
| T10048 | 1000 x 480 mm | See approved drawing | 0.6-0.8mm / 1.0-1.2mm (18-20gauge) / 1.5mm(16gauge) / 4.Customers’ requirements |
| TD8248 | 820 x 480 mm | See approved drawing | 0.6-0.8mm / 1.0-1.2mm (18-20gauge) / 1.5mm(16gauge) / 4.Customers’ requirements |
| TD8453A | 840 x 530 mm | See approved drawing | 0.6-0.8mm / 1.0-1.2mm (18-20gauge) / 1.5mm(16gauge) / 4.Customers’ requirements |
| TD8453B | 840 x 530 mm | See approved drawing | 0.6-0.8mm / 1.0-1.2mm (18-20gauge) / 1.5mm(16gauge) / 4.Customers’ requirements |
Technical specification
Confirm the Order Specification Before Production
Dimensions shown on this page are for model comparison. The signed quotation, approved drawing and sample record control the production order.
Series Specification
Product rangeDrop-In Sinks
InstallationTopmount / Self-Rimming
Steel gradeSUS304, SUS201 or customer requirement
ThicknessModel and order specific
SurfaceBrushed or selected PVD nano color
Custom workSize, logo, accessories and packing after approval
Quotation Checklist
- Selected model numbers and target quantity
- Destination country and port
- Steel grade, thickness and finish
- Faucet holes, drain and accessory list
- Logo method and carton artwork
- Required sample and delivery schedule
OEM / ODM options
Finish, Accessories, Logo and Packing
Choose an existing model, then submit the exact finish, component and private-label requirements. New dimensions or layouts require drawing review and sample approval.
Model and FinishApprove steel grade, surface sample and dimensions.
Accessory SetConfirm every included part on the packing list.
Logo and PackagingProvide artwork, labels and carton requirements.
Zhongshan Homes Kitchenware Co., Ltd.
Sink Production and Order Inspection
HOMES manufactures kitchen sinks for brands, importers, distributors and project buyers. Each order is checked against the confirmed specification from material preparation through packing.
Material Prepared to the Order Sheet
Steel grade, thickness and surface requirements are checked before cutting and forming.
01Material CheckSteel grade, thickness and surface.
02Dimension CheckOverall size, bowl, drain and flatness.
03Surface CheckWelds, brushed lines and visible defects.
04Packing CheckAccessories, labels, marks and quantity.
Shipping method
Export Packing Planned by Model and Order
Carton dimensions, protective materials, pieces per carton and container quantity are confirmed after the final model and accessory list.
Order questions
Drop-In Sinks FAQ
The sink is lowered into a countertop opening from above. The rim rests on the worktop and is sealed according to the approved installation drawing.
Yes. The number and position of holes must be confirmed for the selected model before production.
The current range includes several bowl layouts. Use the model comparison below and request the drawing before countertop fabrication.
Send model numbers, quantity, steel grade, thickness, finish, faucet-hole plan, accessories, packing request and destination port.
Related sink ranges
Explore Other Kitchen Sink Series
Compare installation styles, bowl layouts and OEM options across the HOMES kitchen sink range.
OEM and wholesale inquiry
Request a Model Quotation
Send the selected model, quantity, destination and private-label requirements. The reply will confirm specifications, packing, sample plan and production schedule.