Integrated Ledges
Built-in rails support accessories without reducing the main bowl footprint.
14 current modelsHOMES Workstation Sinks
Workstation Kitchen Sink and Accessory Series
Workstation sinks use integrated ledges to carry cutting boards, colanders, roll-up racks and other sliding accessories. The model and accessory set must be specified together so buyers receive a coordinated working system rather than a bowl alone.
Current Range14 models
Buyer TypeOEM / Wholesale
Lead TimeConfirm by order
InstallationUndermount or Topmount by Model
MaterialSUS304 / specified steel
FinishBrushed / selected PVD
Order BasisApproved model and packing sheet
Series planning
One Bowl, Several Working Levels
The ledge geometry determines which accessories fit and how they move across the bowl. Model selection should cover the sink size, rail position, included boards and baskets, drain components and replacement accessory plan for future orders.
Product construction
What Buyers Should Compare in This Series
Use these construction points together with the model table. Final dimensions, components and installation details follow the approved drawing and quotation.
Matched Accessories
Boards, colanders, racks and strainers are confirmed on the packing list.
Project Variants
Single- and double-bowl formats support different preparation workflows.
Repeat Supply
Accessory specifications are recorded with the model for consistent reorders.
Model range
Workstation Sinks Model Comparison
Select a model to review its current images and specifications. Request the approved drawing before cabinet or countertop fabrication.
| Model | Overall Dimension | Bowl / Cabinet Note | Thickness |
|---|---|---|---|
| U3219W1 | 32 x 19 inch | See approved drawing | 0.6-0.8 mm / 1.0-1.2 mm (18-20 gauge) / 1.5 mm (16 gauge) / 4.Customers' requirements |
| T3322W1 | 33 x 22 inch | See approved drawing | 0.6-0.8 mm / 1.0-1.2 mm (18-20 gauge) / 1.5 mm (16 gauge) / 4.Customers' requirements |
| F3622W1 | 36 x 22 inch | See approved drawing | 0.6-0.8 mm / 1.0-1.2 mm (18-20 gauge) / 1.5 mm (16 gauge) / 4.Customers' requirements |
| T3622W1 | 36 x 22 inch | See approved drawing | 0.6-0.8 mm / 1.0-1.2 mm (18-20 gauge) / 1.5 mm (16 gauge) / 4.Customers' requirements |
| FD3622W1B | 36 x 22 inch | See approved drawing | 0.6-0.8 mm / 1.0-1.2 mm (18-20 gauge) / 1.5 mm (16 gauge) / 4.Customers' requirements |
| TD3622W1A | 36 x 22 inch | See approved drawing | 0.6-0.8 mm / 1.0-1.2 mm (18-20 gauge) / 1.5 mm (16 gauge) / 4.Customers' requirements |
| U4519W2 | 45 x 19 inch | See approved drawing | 0.6-0.8 mm / 1.0-1.2 mm (18-20 gauge) / 1.5 mm (16 gauge) / 4.Customers' requirements |
| WUS3219L1 | :32"Lx19"W x10"D | 30"Lx17"w Minimum cabinet: 33" | 1.0mm |
| WTS3322L1 | :33"Lx22"W x10"D | 31"Lx18"w Minimum cabinet: 34" | 1.0mm |
| WFD3622L | :36"Lx22"W x10"D | 34"Lx18"w Minimum cabinet: 38" | 1.0mm |
| WFS3622L1 | :36"Lx22"W x10"D | 34"Lx18"w Minimum cabinet: 38" | 1.0mm |
| WTD3622L1 | :36"Lx22"W x10"D | 34"Lx18"w Minimum cabinet: 38" | 1.0mm |
| WTS3622L1 | :36"Lx22"W x10"D | 34"Lx18"w Minimum cabinet: 37" | 1.0mm |
| WUS4519L2 | :45"Lx19"W x10"D | 43"Lx17"w Minimum cabinet: 46" | 1.0mm |
Technical specification
Confirm the Order Specification Before Production
Dimensions shown on this page are for model comparison. The signed quotation, approved drawing and sample record control the production order.
Series Specification
Product rangeWorkstation Sinks
InstallationUndermount or Topmount by Model
Steel gradeSUS304, SUS201 or customer requirement
ThicknessModel and order specific
SurfaceBrushed or selected PVD nano color
Custom workSize, logo, accessories and packing after approval
Quotation Checklist
- Selected model numbers and target quantity
- Destination country and port
- Steel grade, thickness and finish
- Faucet holes, drain and accessory list
- Logo method and carton artwork
- Required sample and delivery schedule
OEM / ODM options
Finish, Accessories, Logo and Packing
Choose an existing model, then submit the exact finish, component and private-label requirements. New dimensions or layouts require drawing review and sample approval.
Model and FinishApprove steel grade, surface sample and dimensions.
Accessory SetConfirm every included part on the packing list.
Logo and PackagingProvide artwork, labels and carton requirements.
Zhongshan Homes Kitchenware Co., Ltd.
Sink Production and Order Inspection
HOMES manufactures kitchen sinks for brands, importers, distributors and project buyers. Each order is checked against the confirmed specification from material preparation through packing.
Material Prepared to the Order Sheet
Steel grade, thickness and surface requirements are checked before cutting and forming.
01Material CheckSteel grade, thickness and surface.
02Dimension CheckOverall size, bowl, drain and flatness.
03Surface CheckWelds, brushed lines and visible defects.
04Packing CheckAccessories, labels, marks and quantity.
Shipping method
Export Packing Planned by Model and Order
Carton dimensions, protective materials, pieces per carton and container quantity are confirmed after the final model and accessory list.
Order questions
Workstation Sinks FAQ
The accessory set differs by model and quotation. Every included item should be listed on the approved packing sheet.
Yes, when dimensions and ledge clearance are compatible. Custom accessories require sample confirmation.
Yes. Installation type depends on the selected model and must follow its drawing.
Send model numbers, quantity, steel and finish requirements, full accessory list, logo artwork, carton artwork and destination port.
Related sink ranges
Explore Other Kitchen Sink Series
Compare installation styles, bowl layouts and OEM options across the HOMES kitchen sink range.
OEM and wholesale inquiry
Request a Model Quotation
Send the selected model, quantity, destination and private-label requirements. The reply will confirm specifications, packing, sample plan and production schedule.